Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Fluke 7-300: (1 year) CAL VER /5700
INSTRUMENT:            Fluke 7-600: (1 year) CAL VER /5700
DATE:                  22-Sep-98
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.3 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       25
NUMBER OF LINES:       94
CONFIGURATION:         Fluke 5700A
=============================================================================
#
# Source:
#   Fluke Interoffice Memo from Dan Parker to all service managers 8/1/96.
#   Subject:  Fluke 7-300, 7-600, 12B 18 smf and 18/AL Calibration Procedures
#
# Compatibility:
#   5500/CAL 4.0 or MET/CAL 4.0 or later
#
# Subprocedures:
#   None
#
# Required Files:
#   57_7_cw.bmp
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5700A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R     N              P                            F        V
  1.002  ASK+           K
  1.003  HEAD         EQUIPMENT SETUP
  1.004  DISP         [32]                   WARNING
  1.004  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.004  DISP         of this calibration. DEATH ON CONTACT may result if
  1.004  DISP         personnel fail to observe safety precautions.
  1.005  DISP         No warm-up time requirement.
  1.005  DISP         Ambient temperature: 18C - 28C.
  1.005  DISP         Relative humidity: less than 90%.
  1.006  DISP         Move switch to OFF position.
  1.006  DISP
  1.006  DISP         Note: Erroneous result may occur if switch
  1.006  DISP         is not placed in OFF position before beginning tests.
  1.007  HEAD         {AC VOLTAGE TESTS}
  1.008  PIC          57_7_CW
  1.009  DISP         Move switch to the ON position.
  1.010  HEAD         AC VOLTAGE TESTS: {40V Range}
  1.011  5700   40    4.40V          0.16U         50H                     2W
  2.001  5700   40    35.00V         1.05U         50H                     2W
  3.001  5700   40    35.00V         1.05U         400H                    2W
  4.001  JMPT         7.002          Fluke 7-600: (1 year) CAL VER /5700
  4.002  HEAD         AC VOLTAGE TESTS: {300V Range}
  4.003  5700   300   100.0V         3.2U          50H                     2W
  5.001  5700   300   150.0V         4.6U          400H                    2W
  6.001  5700   300   300.0V         9.0U          50H                     2W
  7.001  JMP          11.001
  7.002  HEAD         AC VOLTAGE TESTS: {400V Range}
  7.003  5700   400   100.0V         3.2U          50H                     2W
  8.001  5700   400   150.0V         4.6U          400H                    2W
  9.001  5700   400   350.0V         10.5U         80H                     2W
 10.001  HEAD         AC VOLTAGE TESTS: {600V Range}
 10.002  5700   600   600V           20U           400H                    2W
 11.001  HEAD         {DC VOLTAGE TESTS}
 11.002  HEAD         DC VOLTAGE TESTS: {40V Range}
 11.003  5700   40    4.40V          0.08U                                 2W
 12.001  5700   40    -35.00V        0.54U                                 2W
 13.001  JMPT         16.002         Fluke 7-600: (1 year) CAL VER /5700
 13.002  HEAD         DC VOLTAGE TESTS: {300V Range}
 13.003  5700   300   100.0V         1.6U                                  2W
 14.001  5700   300   -150.0V        2.3U                                  2W
 15.001  5700   300   300.0V         4.6U                                  2W
 16.001  JMP          20.001
 16.002  HEAD         DC VOLTAGE TESTS: {400V Range}
 16.003  5700   400   100.0V         1.6U                                  2W
 17.001  5700   400   -150.0V        2.3U                                  2W
 18.001  5700   400   300.0V         4.6U                                  2W
 19.001  HEAD         DC VOLTAGE TESTS: {600V Range}
 19.002  5700   600   -600V          10U                                   2W
 20.001  HEAD         {RESISTANCE TESTS}
 20.002  HEAD         RESISTANCE TESTS: {400 Ohm Range}
 20.003  5700   400   0.0Z           +0.2U                                 CW
 21.001  5700   400   1.0Z           0.2U                                  CW
 22.001  5700   400   190.0Z         1.5% 0.2U                             CW
 23.001  HEAD         {CONTINUITY BEEPER}
 23.002  5700         0.0Z                                              S  2W
 23.003  EVAL   -s "0 Ohms" : Is beeper on?
 24.001  5700         1.0Z                                              S  2W
 24.002  EVAL   -s "1 Ohm" : Is beeper on?
 25.001  END